DJI Matrice 210 Normal Operations
- Checklist
- DJI Matrice 210 Normal Operations
- Version / Effective Date
- 3.0 / 21 SEP 2026
- For use in all EMHS/CDRP/DIRT UAS operations.
Preflight Checklist
- Mission Briefing Checklist - COMPLETE
- “Preflight checklist” - ANNOUNCE
- Launch and recovery areas - DEFINED
- Aviation VHF radio - MONITORING AS APPROPRIATE
- Crew radio - CHECK
- GCS - CHARGED, CONFIGURED, ON
- Flight batteries - CHECK
- Propellers - SECURE AND CORRECT
- Airframe - CHECK
- Aircraft SD card - INSERTED, HAS CAPACITY
- Payload SD card - INSERTED, HAS CAPACITY
- Strobes - ATTACHED AND CHARGED
- Master flight mode - “P”
- Throttle - GUARDED
- “Power” - ANNOUNCE
- Master power - ON
- GCS - CONNECTED, PRIMARY AND SECONDARY
- Compass status - CHECK/CALIBRATE
- IMU status - CHECK/CALIBRATE
- ESC status - CHECK
- Gimbal status - CHECK
- Flight battery cell balance - CHECK
- Flight battery voltage - CHECK
- Battery warnings/failsafe levels - SET
- Return to home altitude/mode - CHECK, AS APPROPRIATE
- Failsafe lost link - SET
- Precision landing - AS APPROPRIATE
- Vision sensors - CHECK
- GCS status “Green”- CHECK
- Wind, temperature, density altitude - CHECK
- “Preflight complete” - ANNOUNCE
Ensure airspace is coordinated and deconflicted prior to launch. Maintain operational launch and departure profiles to ensure aircraft separation.
Takeoff Checklist
- “Takeoff checklist” - ANNOUNCE
- Throttle - NEUTRAL
- GPS position - CHECK
- Master flight mode - CHECK
- Payload downlink - CHECK
- Crew and observers - CLEAR OF UAS
- Strobe - ON
- “Arming” - ANNOUNCE
- Arming - EXECUTE
- Home location - CHECK
- Takeoff and departure airspace - CLEAR
- Final systems check - BATTERY VOLTAGE, AUTOPILOT, FLIGHT MODE, WARNINGS
- “Takeoff” - ANNOUNCE
- Takeoff - EXECUTE
- Hover - ESTABLISH
- Flight controls - CHECK
Ensure approach airspace is deconflicted prior to approach and landing. Ensure landing and recovery area is clear of bystanders, vehicles, etc. prior to landing.
Approach and Landing Checklist
- Wind, temperature, density altitude - CHECK
- Approach Altitude - AS APPROPRIATE
- “Approach” - ANNOUNCE
- Master flight mode - "P"
- Landing airspace - CLEAR
- “Landing” - ANNOUNCE
- Hover - ESTABLISH
- Landing area - CLEAR
- Land - EXECUTE
- Motors - STOP
- Throttle - GUARDED
- Strobe - OFF
- “Power Off” - ANNOUNCE
- Master power - OFF